The other nice thing about rsync is that it’s just a command line away. Different Backup/Replication setups between two Synology NAS servers October 5, 2018 January 4, 2019 Ruth Pozuelo Martinez If you have two synology NASes there are a lot of ways for you to backup your data. ... That program has a way of multi-task copying which makes small files transfer over the network super-quick. Robocopy (Robust File Copy) This is a built-in tool in Windows, found in Command Prompt, … You can set an automatic copy NAS to NAS by using the Schedule option. Some are essentially file servers and do allow device-based file operations. a DIY model running your preferred operating system, Stefan came to my rescue with this helpful post. Check my thread here: I had all 705GB of data copied in…well the MBL I am taking the data from is failing, so it does not make it through all 705GB before I have to unplug/replug the drive. I've no idea what's going on under the hood, but surely it can't be that difficult for an OS to copy files quickly. If you want to copy a lot of files faster and more reliably, you need a better solution, such as Robocopy. Robocopy (Robust File Copy) is a command-line tool built into Windows 10, but it’s been around for years, and it’s a powerful and flexible tool to migrate files extremely fast. The results are almost an exact copy of the original. You can also type “pwd” and the current directory name will be shown. Once you run this, you’ll be prompted to verify that the SSH key for the new NAS is indeed correct, and that you want to store it for future use. I have confused you by adding the option to have the results of the command be directed to a log file. Maybe you could give those a try too. ... Robocopy may be the fastest way to copy the files. After mulling over the dozen or so ways to get the job done, I settled on one of our old command line favorites: rsync. A file copy, on the other hand, copies data file by file, and while the file data remains the same, the location of the file on the source and destination devices will likely be very different. I needed to copy my data to the new drive so I could send the failing drive back to WD.  `Public/Shared Pictures/FromOlympusArchive/2007/WallProgress/Originals/P7060005.JPG’ Fastest way to copy files from one directory to another. root@192.168.2.2’s password: The value “directory/logfile” is meant for you to enter the path and filename for where you would like to have the ouput of the wget command go to. First, you’ll need to make sure that SSH access is enabled on both your old NASes. I had the misfortune of my MBL 2TB drive starting to fail. Logging in as admin … Disclaimer: SSH provides access to the network device and all its Hello, I'm trying to copy a large amount of data to my new DS918+ (My first NAS). At its most basic, Network attached storage, or NAS, is a great way to share files on your local…, rsync -avhP --compress --delete --append-verify @:, rsync -avhP --compress --delete --append-verify @: , -h: numbers like file sizes are in human readable formats (megabytes, gigabytes, etc instead of bytes), -P: keep partial transfers for resume later and show progress during transfer, —compress: compress the data using gzip (speeds up data transfer over the network because there is less to transfer), —delete: removes files that are not in the source directory (only use this if you don’t care about what’s in the target directory, useful for mirroring one NAS to another). I needed to copy my data to the new drive so I could send the failing drive back to WD. Gets it done within no time. It will take 6 full days to transfer if i  simply copy and paste. WD made good by replacing it. Do one small directory as a test to make sure you have your syntax right, and when that works, move up to the parent directory, and copy the whole thing at once. Just awesome. If you install putty (search with google) on your computer you can do this. On my 1GB network moving files from a 2TB MBL to a 6TB MBL-Duo went at a rate of 20-35MB/s! What it means is that a block copy copies everything in a data block from one device to the other. Name the task so that you can distinguish it from other sync tasks. done.    ==> LIST ... done. SSH allows you to log in to your NAS from the command line, using a secure shell. I also tried my old passwords and 123456 but everything fails…any thoughts. However to list files the command is “ls” and not “dir”. There are a lot of ways to get the job done, but rsync has a few significant advantages over just opening a pair of windows on your PC and dragging files from one to the other. My suggestions would be to try the default password of “welc0me” and also try removing both the userid and password (and the colon). To move or copy files from your computer to the NAS you can use the same commands as you have in windows (ctrl+c= copy, ctrl+v= paste), drag and drop between the windows, or upload. QNAP) to another Synology . File Fisher. Before we go on, let’s talk about those flags—the “-azP”—you see in the command above. ==> LIST … done. 3. If you’re an old hat with rsync, this walkthrough at How-to Geek will help you take those skills to the next level. So here is what I did to copy all the files from “Public” on one MBL to “Public” on another: (Updated switches 12-FEB-2012 to fully copy drive), Enable ssh on your MBL (http://ip-address-of-MBL/UI/ssh), Log onto the MBL with putty or something similar, cd /shares (this puts you at the root of the Windows, etc accessible files. Fastest way to move files from one Diskstation to another I’ve bought the DS918+ and will use my old DS413 as a backup NAS. Robocopy (Robust File Copy) is a command-line tool built into Windows 10, but it’s been around for years, and it’s a powerful and flexible tool to migrate files extremely fast. ==> TYPE I … done. You can mount remote folders from remote servers (such as network computers or other Synology NAS devices) to navigate and manage the mounted folders via File … ==> RETR P7060005.JPG … done. That way you’ve created the directories and granted them permissions using your NAS’s interface, and the files inside will retain whatever permissions they had. Note: is “colon” followed by “p” in the wget command. Do you know your way around linux at all? 1. unauthorized users access to your network.            => `Public/.listing’ if I drag files from share 1 to share 2, windows starts reading the files on share 1 and copying them over to share 2. You’ll be prompted to log in, and once you do, you’ll get dumped into a new command line representing your NAS. WD made good by replacing it. Launch AOMEI Backupper. You’ll be prompted for a username (admin or root) and a password. ’. One of alternative ways of transferring files from PC to PC. should enable it. Doing this through Windows file copy or FreeFileSync or some other way was going to take a long time. I could use [X METHOD] to do the same thing,” and you’d be right! You’ll be surprised what you’ll turn up, and how many people had the same problem you did. Test 2: Copy 2 large files using the same source and destination as test 1. You’ll be prompted to log in to the new NAS with the admin password. I've been reading the forums and advice is all over the place. Then remove the RAID1 disk. GREAT NEWS. The two NASs physically sit next to each other and connect via Ethernet into the same switch. permitted by applicable law. Replace “password” with the admin password for the MBL. You can use it to do much more than this such as automatic backup to NAS, backup NAS to external hard drive, migrate OS from one computer to another, etc. Once you have all of your files migrated, you’re free to do whatever you want with the old NAS. My defective drive folders can be accessed but the dashboard can not.                                                   826K=0.001s :47:32 (826 KB/s) -Public/Shared Pictures/FromOlympusArchive/2007/WallProgress/Originals/.listing’ saved [604] ==> PASV … done. wget -mirror -np -x --no-host-directories -o “directory/logfilename” ftp://admin:password@ip-address/Public. Very helpful information, thanks for sharing it. Use the internal file copy facility to transfer the data. And for the real way to do it is to shutdown both servers, pull the cache drive from one and add it to the other. 09:47:32--  ftp://admin:*password*@10.0.0.135/Public/Shared%20Pictures/FromOlympusArchive/2007/WallProgress/Originals/P7060005.JPG FastCopy FastCopy has been tested by many people and the results show that it is far the fastest copying program out there for Windows. Luckily, Stefan came to my rescue with this helpful post on the error. It will probably be faster if you have/purchase a NAS to copy them to, then just ship the whole NAS to the customer and they can offload and return the NAS. Is this a one-way sync or two way, a one-way sync sends data to the receiving NAS when you perform syncs, the source data remains unchanged. Copy Handler. Mount Remote Folders. MyBookLive:~# ls /shares But when you upgrade to a new one… Transfer rate is 1MB/sec. Folks, I thought I would share a fast way to copy files from one NAS to another. Connecting to 10.0.0.135:21… connected. If you just need raw speed, then this program is the best. Now it’s time to get down to business. Failure to understand the Linux command line interface login as: root In OS X or Linux, just open a terminal window and type this: slogin admin@[IP ADDRESS OF YOUR OLD NAS]. MyBookLive:~#. So, that’s that fastest way to transfer files from PC to PC. If you run into issues with the copy, or with other odd, quirky problems, do some Googling for your error messages and the OS of your old or new NAS. I had the misfortune of my MBL 2TB drive starting to fail. Here, the command is used to copy all the files, subfolders, and files contained in the subfolders [/s] from source of C:\Videos to the destination folder Media Backup located on a computer on the network by the name of SERVER.We're copying some really large video files, so buffering should be disabled to improve the copy process [/j], and since we're copying over the … 100% 31.1M=0.02s. 1. Then use builtin mc to copy the files across - server to server with out additional intermediate devices and get closer to wirespeed 80MB/s. In this option we are going to use Hybrid Backup Sync to copy the data over from your old NAS to the new one over a network connection. Thank you for your great explanation. When one came in to be swapped, it didn't take long to run robocopy and transfer only new files that had been created since the drive was last on site. 'cd /shares (this puts you at the root of the Windows, etc accessible files. 09:47:32--  ftp://admin:*password*@10.0.0.135/Public/Shared%20Pictures/FromOlympusArchive/2007/WallProgress/Originals/P7060004.JPG I figured that the fastest and easiest way to transfer all the data would be to enable an FTP server on one device and install an FTP client on … You should see “Public” here.) Click “Add Folder” to select the folder(s) which … … . Login incorrect. Go ahead and do that too. individual files in /usr/share/doc/*/copyright. Another way to transfer files between computers, not only over your … Way 1: copy files from one hard drive to another. Hello, I'm trying to copy a large amount of data to my new DS918+ (My first NAS). I have enabled ssh on my new MBL and I have also downloaded putty. I am currently copying the data one root folder at a time using "copy"/"paste" using two file browser windows on my Windows 10 machine. In this guide , you’ll learn the steps to use Robocopy to quickly transfer a lot of files over the network on Windows 10. (Hopefully very few of these.) Having input cd /shares I do not see Public. This can be considered as one the fastest and best ways to transfer files within a network. wget -mirror -np -x --no-host-directories ftp://admin:yyyyyyyyyyyyy@192.168.2.1/Public, What you will see now is LOTS of activity on the screen. Used to use robocopy to backup our files when the company was much smaller (back in our single server days). Could you let me know the best and fastest way to do this please. You may get a warning about the key the first time you connect, but that’s okay. “wget” is already installed on the MBL, so NO HACKING is required! Two-way sync will keep both NAS files synchronized, meaning if you delete files from one NAS the other NAS files will be deleted. In Windows, open PuTTY. Replace “ip-address” witht the ip-address of the NAS you would like to copy FROM. Launch AOMEI Backupper. Setup New NAS and Transfer the Data Over. rsync man page: http://linux.die.net/man/1/rsync. Did you set up any other users? After starting by copying from one share to another on my computer and realizing this is bringing the file from the usb at the nas back to my computer and then back to the nas, way too slow for the approx 3tb of data I have to move. Once you’re logged in, you’ll be dropped at the command line for your NAS. Set up Frontview backup job on either the NV+ to push the data from the NV+ to the Ultra or on the Ultra to pull the data from the NV+. wget -mirror -np -x --no-host-directories -o “directory/logfilename” ftp://admin:yyyyyyyyyyyyy@192.168.2.1/Public, I then get: wget: directory/logfilename: No such file or directory. 4 (596K) ... .                                           100% 18.1M=0.03s :47:32 (18.1 MB/s) -Public/Shared Pictures/FromOlympusArchive/2007/WallProgress/Originals/P7060004.JPG’ saved [609994] The output you shared is exactly what I would expect. Ask Question Asked 5 years, 5 months ago. Public wget-log I had errors for 2 folders where it listed the folder path and "Operation failed.” The other files seemed to continue copying. Click “Sync” and select “Basic Sync”. The best way is to use an sftp client like WinSCP. Depending on how you perform the copy of the data, if you are using your laptop and Windows Explorer to copy the data from one NAS to the next, perhaps copying the data from one network drive to another, then I believe the data copy does go through your laptop … I wanted a platform-agnostic method. This freeware supports all the … So far I've had many issues.. 1st Attempt: I tried using File Staton to copy 615GB from an external HD (HFS+) plugged directly into the NAS's front USB port.. If you enable SSH, do not share            => `Public/Shared Pictures/.listing’ It’s great, but as soon as I set it up I was stuck with the task of transferring terabytes of data from to the new NAS. I figured that the fastest and easiest way to transfer all the data would be to enable an FTP server on one device and install an FTP client on the other. —append-verify: uses a less expensive process for completing partially transferred files by filling the partially transferred file in and comparing instead of constantly comparing. If you can, plug the drives into your PC, and copy over the network, that will be the fastest way to get data on your NAS. equired. This way you will list the CURRENT directory to make sure you are in the right one. The command to change directories is that same as for Windows command window (DOS for the old timers) “cd”. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent ==> CWD /Public … done. I didn’t want to physically move drives, since the old drives were smaller than the new ones. I can hear you now: “Why use the command line for this? It’ll take ages, but when you’re finished, your new NAS will be set up exactly like your old one was, all ready to go. The programs included with the Debian GNU/Linux system are free software; Here’s a much more reliable method. 4GB totaling 24,185 files / 6193 folders with sizes of a few bytes to 320MB. Hmmm…well you already tried your old password. Logging in as admin … Logged in! Compatibility: Windows 10, 8, 7 | Size: 511 KB | Price: Free | Try Now. That is, I'm moving 500k files to another folder, leaving 20k files behind. 2. We’ve shown you how to mirror systems with it before, and how to sync iTunes with any USB device, but it’s also useful just for straight machine-to-machine copies because it’s so flexible. - Something that will transfer the files fast … Here’s how: rsync -azP [SOURCE DIRECTORY] admin@[IP ADDRESS OF YOUR NEW NAS]:[SOURCE DIRECTORY]. content, only users with advanced computer networking and Linux experience 3. ==> PASV … done. Not too long ago, I picked up a brand new NAS with way more space than my old one. What is the best way to transfer the data? 2 (609K) The best … If you plan to sell or get rid of it though, make sure you wipe it properly and clean it up beforehand. done. In the host name field, type in the IP address of your old NAS, make sure SSH is selected, and click Open. Move/Copy files from your computer to the NAS. I have the same problem of trying to transfer all my data from one defective MybookLive to another. Since I was moving from one Synology NAS to another, I could have used their migration tool, and you’d be right, but if I were moving from a Synology to a ReadyNAS, or from FreeNAS to Synology, I wouldn’t have had that option. I am at a loss to help if you cannot log in :cry: Powered by Discourse, best viewed with JavaScript enabled, QUICKLY copying files from one NAS to another, QUICKLY copying files from one NAS to another using wget, ftp://admin:yyyyyyyyyyyyy@192.168.2.1/Public, ftp://admin:*password*@10.0.0.135/Public/Shared%20Pictures, ftp://admin:*password*@10.0.0.135/Public/Shared%20Pictures/Shared%20Pictures, ftp://admin:*password*@10.0.0.135/Public/Shared%20Pictures/FromOlympusArchive/2007/WallProgress/Originals/Shared%20Pictures, ftp://admin:*password*@10.0.0.135/Public/Shared%20Pictures/FromOlympusArchive/2007/WallProgress/Originals/P7060004.JPG, ftp://admin:*password*@10.0.0.135/Public/Shared%20Pictures/FromOlympusArchive/2007/WallProgress/Originals/P7060005.JPG, ftp://admin:*password*@192.168.2.1/Public. Instead of typing “ls /shares” you would do better to just type “ls”. the content on your network device. 4 Easy Ways to Copy a Large Number of Files Quickly in Windows By Elsie Biage / Jun 27, 2019 / Windows Windows has come a long way as an operating system, but copying files from one location to another is one aspect about it that continues to disappoint. 2x Windows 8 ISO’s (x86 and x64) totaling 5.8GB. –2012-02-12 09:46:45--  ftp://admin:*password*@10.0.0.135/Public/Shared%20Pictures Connecting to 192.168.2.1:21… connected. If you’re a stickler and prefer granular control, create your directories and shares on the new NAS, then just copy the contents of each directory from the old NAS to the new one. But how…. ), wget -mirror  -np -x --no-host-directories -o “directory/logfilename” ftp://admin:password@ip-address/Public, Replace “password” with the admin password for the MBL, Replace “ip-address” witht the ip-address of the NAS you would like to copy FROM, “-mirror” means recursively drill down unlimited depth, “-np” keeps recursion below the parent (probalby not needed), “-x” creates even empty directories if they exist, “–no-host-directories” means do not prepend the ip-address to the local directory structure. The fastest way to move data from one NAS (incl. A NAS, or network-attached storage device, is great for storing files you can reach from any computer in the house. But it is far beyond this function. For example to transfer a 21GB directory took 21min. By the way, the points Milos raises are all good. Another free app for windows pc, give you the full control over the file copy … Click “Add Folder” to select the folder(s) which you want to synchronize from the source drive. It is true that I am not at all familiar with Linux. Urgent Hetty from the Netherlands :stuck_out_tongue: Are you able to log on through ssh (secure shell)? A NAS, or network-attached storage device, is great for storing files you can reach from any computer in the house. “root” is the equivalent of administrator. the exact distribution terms for each program are described in the They are both connected via a gigabit ethernet switch and/or router. Something like this…. Used it to copy to numerous external drives, cycling them out to an off-site backup. So far I've had many issues.. 1st Attempt: I tried using File Staton to copy 615GB from an external HD (HFS+) plugged directly into the NAS's front USB port.. The average transfer rate over all files copied (small, large, and otherwise) is 19MB/s for me. Ah…the user id is “root” and the password is the same password you have assigned for web interface access. Use your favorite SSH tool (in Linux or OS X, you can just open a terminal window, in Windows I like PuTTY for this) to log in to your old NAS. 1.  Public/Shared Pictures/FromOlympusArchive/2007/WallProgress/Originals/.listing' ic/Shared Pictures/FromOlympusArchive/2007/WallProgress/Originals ... done. ==> CWD /Public/Shared Pictures … done. ==> LIST … done. Re: Fastest way to copy files between NASs? So…let’s skip that step. Active 2 years, 11 months ago. 0K                                                        203K=0.02s, 2012-02-12 09:46:46 (203 KB/s) - `Public/Shared Pictures/.listing’ saved [3767], 09:47:32--  ftp://admin:*password*@10.0.0.135/Public/Shared%20Pictures/FromOlympusArchive/2007/WallProgress/Originals/Shared%20Pictures  Public/Shared Pictures/FromOlympusArchive/2007/WallProgress/Originals/P7060004.JPG' equired. With luck, you can get some cash for it. Transfer Files by Email. 1. Re: Fastest way to copy files between NASs? –2012-02-12 09:46:46--  ftp://admin:*password*@10.0.0.135/Public/Shared%20Pictures/Shared%20Pictures Everything worked up to the point where my login failed. It took me over 10hours to copy 800GB via USB. You are logging onto a linux machine. I thought I would share a fast way to copy files from one NAS to another. You’ll need to tell rsync how to log in to the remote device, and where to put the files, all in one command. AOMEI Backupper can use the simplest way to copy NAS to NAS. Name the task so that you can distinguish it from other sync tasks. You should also read: Transfer Files Between Two Windows PC’s Without Any USB Device – A Wifi connection: A computer system that supports Wifi and a Wifi connection in your vicinity that your computer can be connected to. Entering simply causes a bad password response. Where 192.168.1.X is the IP address of your new NAS. Way 1: copy files from one hard drive to another. If everything else was successful, as soon as you do, your file sync will begin. rror: No such file or directory Copy Handler is a tool that while it sits in your system tray, can take over the file copying operations from Windows… Another, more complicated option- remove one of the RAID disks and one new 2TB disk (already formatted in the NAS) and attach them to spare SATA ports on your PC (assuming you have one) use Linux to copy files between the disks or use ext2fsd driver in Windows. But when I come to use putty, it opens a black page and asks 'sign on as 'I type admin and then it asks for a password but with a little yellow curser that won’t allow any input. You can’t just fire up a terminal window and start copying though—you’ll need to do a little initial setup. While Windows has undoubtedly come a long way in 3 decades, one aspect continues to disappoint. done.    ==> RETR P7060004.JPG ... done. It can even give you a handy progress bar so you can make sure everything goes smoothly. My mbl has no password at this time. Now we’re ready to log in to our old NAS and push our files to the new one. can result in rendering your network device inoperable, as well as allowing In my case, when I was migrating my Synology NAS, I ran into some quirky “rsync service is not running” errors when I tried to push or pull files, only to find out that I needed to make sure Synology’s “Network Backup Service” and “Network Destination Service” were enabled on both the source and destination NAS—two checkboxes buried deep on the Service tab of “Info Center” in the Control Panel. Similarly, Justin Ellingwood’s rsync walkthrough on DigitalOcean’s community forums is super helpful if you want to learn the ins and outs of rsync for the purpose of moving files across systems, and helped me identify the best flags to use and when to use that trailing slash and when not to. My sytem is 64bit win7 ultimate but putty is x86…is this the problem or something else. On my Synology NAS, this was right under Control Panel, labeled “Terminal & SNMP.” You’ll likely find it in a similar place on your NAS, but it’s usually under System, Remote Access, or any other synonym for “remote management.”. –2012-02-15 23:15:45-- ftp://admin:*password*@192.168.2.1/Public I need to copy files from one directory to another, depending on the existence of the file name in a table of SQL database. My windows computer is on the same network in another room, connected to NAS switch via a Ethernet over Power adapter which struggles to reach full gigabit speeds. Type “yes” to continue. The syntax is pretty simple. 0K                                                       20.1K=0.2s, 2012-02-12 09:46:46 (20.1 KB/s) - `Public/.listing’ saved [3573]. Is it possilbe to just move the files instead of this copy/read operation, just like what happens within individuals shares? I have reset my Mybooklive (defective one) and assumed that admn:admin would work but no. I'd like the following: - A good log of any copy errors and a record of the files that didn't make it. I had errors for 2 folders where it listed the folder path and "Operation failed.” The other files seemed to continue copying. Copy files from one drive to another, or even within the same disk drive, seems to get slower in every release of the operating system. ... One of the fastest way to copy files is use robocopy as pointed by Pyrolistical in above post.